Makima NSFW Figure Guide: Size, Head, Skeleton & Display
The LORIBEAR Makima silicone figure is a 71.5 cm (body 65 cm) platinum silicone NSFW figure with a posable metal skeleton – large-scale and fully re-posable, but not life-size.
The LORIBEAR Makima NSFW figure is a 71.5 cm (body 65 cm) platinum silicone figure from the LORIBEAR series. Inspired by Makima from Chainsaw Man, the figure is built around her braided copper-red hair, ringed eyes and calm, controlling presence. This guide covers size, head type, posing, display, care and how to buy a genuine piece.
Many collectors start by searching for a Makima life size figure or a Makima figure review. This guide explains what the LORIBEAR version actually is, how big it is compared with a life-size statue, and which listed specifications matter before buying.
Is there a Makima life size figure? Size and scale explained
A true life-size (1:1) Makima statue would be a full human-height display piece. The LORIBEAR Makima NSFW figure is not life-size: it stands 71.5 cm (body 65 cm), and it is listed as a 1/3 silicone figure. That makes it a large-scale figure that fits on a shelf, desk or display cabinet, while still being much bigger than a typical 1/7 or 1/6 PVC statue. Because the body is platinum silicone over a posable metal skeleton, it can be re-posed and dressed, which a fixed Makima statue cannot.
Makima real size figure vs large-scale silicone figure
If you are comparing a Makima real size figure with the LORIBEAR version, the practical differences are space, weight and handling: a 71.5 cm (body 65 cm) silicone figure is easier to store, move and photograph. Check the exact measurements in the table below.
Makima silicone figure specifications
| Product | Makima NSFW Figure (71.5cm) |
|---|---|
| Inspired by | Makima (Chainsaw Man) |
| Height | 71.5 cm (body 65 cm) |
| Body | Platinum silicone |
| Skeleton | Posable metal skeleton |
| Head | PU head with soft vinyl hair |
| Scale | 1/3 |
| Bust | 32 cm |
| Waist | 20 cm |
| Hips | 35.5 cm |
| Shoulder width | 15 cm |
| Leg length | 39 cm |
| Outer box | 72 × 26 × 21 cm |
| Stand | Sold separately |
| Edition | Limited to 1,000 pieces worldwide, never re-released |
Measurements are taken from the product page; always check the product page for the current options before ordering.
Makima figure review checklist: what to look at
Rather than quoting reviews, this checklist covers the listed facts a buyer should confirm on the Makima NSFW figure product page.
Head and face
The Makima figure uses a PU head with soft vinyl hair. The soft vinyl hair is shaped as part of the head design, so the hairstyle keeps its character silhouette.
Posing and display
The posable metal skeleton lets the Makima figure hold standing, seated and reclining display poses. Move joints slowly and within a natural range, and support the torso when repositioning. A display stand is not included; stands are sold separately and help with stable standing poses. For photography, small changes to head angle, hand position and lighting change the character impression more than large pose changes.
For step-by-step posing tips, see How to Pose a Silicone Figure.
Outfit and removable clothes
The Makima figure is a complete silicone body dressed in its character outfit, so the clothes can be taken off or changed. Fit clothing gradually and check strongly dyed fabrics for colour transfer. See more cast-off anime figures with removable outfits.
Display stand
The exclusive stainless steel LORIBEAR display stand with the LORIBEAR logo is sold separately and offered as an add-on at checkout.
Makima silicone figure vs PVC statue
Most Makima statues on the market are fixed PVC or resin pieces. A silicone figure trades the crisp sculpted detail of PVC for a soft body that can be posed and dressed. For a full comparison read Silicone vs PVC vs Resin Figures.
Care basics
Platinum silicone stays in best condition when kept clean, dry and away from direct sunlight and heat. Strongly dyed clothing can transfer colour onto silicone over time, so check outfits before long contact. See the NSFW figure care and cleaning guide for step-by-step care.
Limited edition and authenticity
Each LORIBEAR design, including Makima, is limited to 1,000 pieces worldwide and is never re-released. Genuine LORIBEAR is sold here on the official site, at gkdoll.com and through authorized LORIBEAR resellers. Read more about LORIBEAR or see how to buy a genuine LORIBEAR figure.
To check a figure you already own, see Genuine LORIBEAR – How to Verify (brown carton, printed LORIBEAR box and black scratch-off anti-counterfeit card with QR code).
Makima silicone figure at a glance
The table below gathers the key Makima silicone figure specifications in one place, taken from the official Makima NSFW figure product page. If a value differs between this guide and the product page, the product page is the reference.
| Height | 71.5 cm (with head) |
|---|---|
| Weight | see product page |
| Body | Platinum silicone over a posable metal skeleton |
| Head & hair | PU head, soft vinyl hair |
| Edition | Limited to 1,000 pieces worldwide, not individually numbered, never re-released |
| Display stand | Display stand sold separately |
Makima silicone figure vs a PVC statue
Most Chainsaw Man figures on the market are PVC or resin statues: hard, painted and fixed in a single pose, with clothing sculpted as part of the figure. The LORIBEAR Makima silicone figure works differently. The body is soft platinum silicone, the internal metal skeleton lets you change the pose for display or photography, and the outfit is a separate piece that can be changed. The head is a PU head with a moulded soft vinyl hairstyle that holds its shape.
That flexibility comes with a little more care: silicone should be kept away from direct sunlight, heat and dyed fabrics, and poses should stay within each joint's natural range. Our silicone vs PVC vs resin figures comparison and how to pose a silicone figure guide cover both in more detail.
Planning display space for the Makima figure
At about 71.5 cm, the Makima figure is a desk- or shelf-scale collectible rather than a life-size piece. Plan for the full standing height plus a little headroom, and for the footprint of the exclusive stainless LORIBEAR display stand if you add it (it is sold separately). A closed cabinet or a shelf out of direct light helps keep the silicone and outfit looking their best over time.
Buying a genuine Makima silicone figure
Genuine LORIBEAR is sold here on the official site, at gkdoll.com and through authorized LORIBEAR resellers. Each genuine figure arrives in a printed LORIBEAR box inside a plain brown carton, with a black scratch-off anti-counterfeit card you can scan to verify; see how to verify a genuine LORIBEAR. Browse related characters in Chainsaw Man NSFW Figures or the full silicone anime figures collection.
Makima figure FAQ
Is the LORIBEAR Makima figure life size?
No. It is about 71.5 cm (body 65 cm) tall and listed as a 1/3 silicone figure; a life-size statue would be full human height.
What should a Makima figure review check?
Height and weight, head type (this model: PU head with soft vinyl hair), the posable metal skeleton, included outfit parts, whether a stand is included (it is sold separately) and authenticity packaging.
How tall is the Makima NSFW figure?
About 71.5 cm (body 65 cm).
Is a display stand included?
No. Stands are sold separately.
What head does the Makima figure use?
A PU head with soft vinyl hair.
Will this figure be re-released?
No. Each LORIBEAR design is limited to 1,000 pieces worldwide and is never re-released.
Where can I buy a genuine one?
Here on the official LORIBEAR site, at gkdoll.com and through authorized LORIBEAR resellers.
Related
- Makima NSFW figure
- Chainsaw Man NSFW figures
- silicone anime figures
- Best NSFW Figures buyer guide
- Reze NSFW figure guide
- What is an NSFW figure? The LORIBEAR guide
- all LORIBEAR NSFW figures
LORIBEAR figures are adult collectibles for buyers aged 18 and over.